Special Steel Grades for Special Requirements
Design and development engineers require the highest standards when it comes to steel. For this reason we offer our customers an extensive range of special steel grades: high-tensile fine-grained structural steel, micro-alloyed cold-forming steel, high-tensile thin slab casted strip and abrasion resistant special structural steel grades.
You can get all information about our special steel range in our new brochure or here in the overview:
Special Steel Grades* | Steel Grade | Thickness | Width | Length |
| High-tensile fine-grained structural steel according to EN 10025 – 6 Test certificate 3.1 according to EN 10204, tolerances according to EN 10029 | S690QL/QL1 | 4 - 200 | 1.000 - 3.000 | max. 12.000 |
| S890QL/QL1 | 6 - 80 | 1.000 - 3.000 | max. 12.000 | |
| S960QL/QL1 | 6 - 80 | 1.000 - 3.000 | max. 12.000 | |
| Abrasion resistant special structural steel with at least 360/400/450 HB Test certificate 3.1 according to EN 10204, tolerances according to EN 10029 | ABRAZO 400/450/500 | 4 - 100 | 1.000 - 3.000 | max. 12.000 |
| FORA 400/450/500 | 4 - 100 | 1.000 - 3.000 | max. 12.000 | |
| Micro-alloyed, high-tensile cold-forming steel Test certificate 3.1 according to EN 10204, tolerances according to EN 10051, suitable for laser processing | ||||
| to EN 10149 - 2 | Ympress® S420MC | 1,6 - 20 | 1.000 - 2.000 | max. 12.000 |
| Ympress® S460MC | 1,6 - 20 | 1.000 - 2.000 | max. 12.000 | |
| Ympress® S500MC | 1,8 - 15 | 1.000 - 2.000 | max. 12.000 | |
| Ympress® S550MC | 1,8 - 10 | 1.000 - 2.000 | max. 12.000 | |
| Ympress® S700MC | 4 - 8 | 1.000 - 1.500 | max. 12.000 | |
| Also available in non-standard lengths. Lengths over 12,000 mm upon request. | ||||
| to the Corus IJmuiden material data sheet | Ympress® E690 | 2 -13 | 1.000 - 1.800 | max. 12.000 |
| Also available in non-standard lengths. Lengths over 12,000 mm upon request. | ||||
| nach EN 10149 - 2 | S355MC - S700MC* | 2 - 20 | 1.000 - 2.000 | max. 12.000 |
| Also available in non-standard lengths. Lengths over 12,000 mm upon request. | ||||
| High-tensile, low alloyed hot-rolled thin slab casted strip | ||||
| (on the basis of EN 10268) | Ymagine® H320 | 1 - 3 | 1.000 - 1.500 | max. 4.000 |
| Test certificate 3.1 according to EN 10204, width tolerances according to EN 10131, thickness tolerance according to the material data sheet of Corus IJmuiden | Ymagine® H360 | 1 - 3 | 1.000 - 1.500 | max. 4.000 |
| Ymagine® H420 | 1,5 - 3 | 1.000 - 1.500 | max. 4.000 | |
| Ymagine® H500 | 1,8 - 3 | 1.000 - 1.350 | max. 4.000 | |
| Also available in non-standard lengths. Lengths over 4,000 mm upon request. | ||||
| Quality standard according to ISO 9001:2000 Also available: - Shotblasting and priming - Levelling – with improved flatness - Material testing * Not all combinations of thicknesses and widths are possible. All measurements in mm. | ||||