Widest Choice for best Results
Our hot-rolled steel grades with different strength and ductility grades are suitable for a wide range of applications. Varying combinations of strength and ductility allow the product engineer to design the optimum end product.
You can get all information about our hot-roll steel range in our new brochure or here in the overview:
Hot-rolled Strip* | Steel Grade | Thickness | Width | Length |
| General structural steel according to EN 10025–2 Test certificate 3.1 according to EN 10204, tolerances according to EN 10051, untreated, pickled and oiled, pickled and dry, suitable for laser processing | S235JR +AR/+N | 3 - 20 | 1.000 - 2.000 | max. 12.000 |
| S355J2 +N | 3 - 20 | 1.000 - 2.000 | max. 12.000 | |
| Also available in non-standard lengths. Lengths over 12,000 mm upon request | ||||
| Hot-rolled sheet in special laser quality | ||||
| on the basis of EN 10025–2 to EN 10149–2 | Ympress-Laser® E250C | 1,5 - 20 | 1.000 - 2.000 | max. 12.000 |
| Ympress-Laser® S355MC | 1,5 - 20 | 1.000 - 2.000 | max. 12.000 | |
| Ympress-Laser® S420MC | 1,6 - 20 | 1.000 - 2.000 | max. 12.000 | |
| on the basis of EN 10025–2 to EN 10149 – 2 | LASER-ALFORM® 240N | 3 - 15 | 1.000 - 1.500 | max. 3.000 |
| LASER-ALFORM® 355M | 3 - 15 | 1.000 - 1.500 | max. 3.000 | |
| LASER-ALFORM® 420M | 3 - 15 | 1.000 - 1.500 | max. 3.000 | |
| Micro-alloyed, high-tensile cold-forming steel Test certificate 3.1 according to EN 10204, tolerances according to EN 10051, suitable for laser processing | ||||
| to EN 10149–2 | Ympress® S355MC | 1,5 - 20 | 1.000 - 2.000 | max. 12.000 |
| Ympress® S420MC | 1,6 - 20 | 1.000 - 2.000 | max. 12.000 | |
| Ympress® S460MC | 1,6 - 20 | 1.000 - 2.000 | max. 12.000 | |
| Ympress® S500MC | 1,8 - 15 | 1.000 - 2.000 | max. 12.000 | |
| Ympress® S550MC | 1,8 - 10 | 1.000 - 2.000 | max. 12.000 | |
| Ympress® S700MC | 4 - 8 | 1.000 - 1.500 | max. 12.000 | |
| Also available in non-standard lengths. Lengths over 12,000 mm upon request. | ||||
| to the Corus IJmuiden material data sheet | Ympress® E690 | 2 -13 | 1.000 - 1.800 | max. 12.000 |
| Also available in non-standard lengths. Lengths over 12,000 mm upon request. | ||||
| to EN 10149-2 | S355MC - S700MC* | 2 - 20 | 1.000 - 2.000 | max. 12.000 |
| Also available in non-standard lengths. Lengths over 12,000 mm upon request. | ||||
| to SEW 092 | QSTE380TM | 3 - 20 | 1.000 - 2.000 | max. 12.000 |
| Also available in non-standard lengths. Lengths over 12,000 mm upon request. | ||||
| Boiler plate steel grades according to EN 10028–2 | P265GH | 3 - 15 | 1.000 - 2.000 | max. 12.000 |
| Test certificate 3.1 according to EN 10204 and AD2000/W1, tolerances according to EN 10051 | Also available in non-standard lengths. Lengths over 12,000 mm upon request. | |||
| Shipbuilding plates Steel grades according to the classification societies GL, LRS, DNV. Other societies if desired | ||||
| Shipbuilding steel plates with normal strenght | Grad A | 3 - 15 | 1,000 - 2,000 | max. 16,000 |
| Hot-rolled steel strip for cold forming according | DD11 | 1,5 - 12 | 1.000 - 2.000 | max. 6.000 |
| to EN 10111 | Also available in non-standard lengths | |||
| Test certificate 3.1, tolerances according to EN 10051, pickled and lightly oiled, suitable for laser processing | ||||
| Hot-rolled thin slab casted strip (on the basis of EN 10268) Test certificate 3.1 according to EN 10204, width tolerances according to EN 10131, thickness tolerances according to the Corus IJmuiden material data sheet | ||||
| Mild unalloyed steel grades | Ymagine® D1 | 1 - 3 | 1.000 - 1.500 | max. 6.000 |
| (on the basis of EN 10111) | Also available in non-standard lengths. Lengths over 6,000 mm upon request. | |||
| Structural steel grades | Ymagine® S1 | 1 - 3 | 1.000 - 1.500 | max. 6.000 |
| (according to EN 10025) | Also available in non-standard lengths. Lengths over 6,000 mm upon request | |||
| High-tensile, low-alloyed steel grades (according to EN 10268) | Ymagine® H320 | 1 - 3 | 1.000 - 1.500 | max. 6.000 |
| Ymagine® H360 | 1 - 3 | 1.000 - 1.500 | max. 6.000 | |
| Ymagine® H420 | 1,5 - 3 | 1.000 - 1.500 | max. 6.000 | |
| Ymagine® H500 | 1,8 - 3 | 1.000 - 1.350 | max. 6.000 | |
| Also available in non-standard lengths. Lengths over 6,000 mm upon request. | ||||
| Quality standard according to ISO 9001:2000 Also available: - Shotblasting and priming - Levelling – with improved flatness - Material testing * Not all combinations of thicknesses and widths are possible. All measurements in mm. | ||||